NOBØ Radiant Ceiling Panel Heaters are
unique in operation as they provide heat to areas which are impossible or
impractical to heat by other methods. They are designed for overhead installation
and produce continuous long wave radiant heat, just like the sun
NOBØ Radiant Ceiling Panel Heaters
produce 'spot' heat directly below them in a broadening pyramid / triangular
shape, hence the higher they are installed, the heat 'footprint' will vary both
in area and intensity. They are not necessarily designed to heat an entire space
even though some heat drift will typically occur
NOBØ Ceiling Panel Heaters are quick
acting and rapidly reach their working temperature of 300 degrees Celsius for
the TTP/TTS and 400 degrees Celsius for the TVH, resulting in a high level of
performance efficiency and economical running costs
NOBØ Ceiling Panel Heaters require
independent controls. Air thermostats/timers or heating regulators to efficiently
control the heat output are recommended
Accurate project sizing, model,
thermostat and timer recommendations are available from your NOBØ dealer
Brackets for surface mounting direct to
ceilings are included with each heater. Optional 45 degree angle brackets are also
available. Alternatively, they may be suspended by chain or suspension wire
The minimum floor to panel face distance
must be adhered to. There must also be a minimum 150mm clearance from any wall or
beam and 500mm minimum from any object underneath. With an IP rating of 44 these
heaters are ideal for installation in wet areas ie bathrooms, shower rooms or
swimming pool change rooms